SMTPTransporter

The SMTPTransporter class allows you to configure SMTP connections and send emails through SMTP transporter objects.

SMTP Transporter object

SMTP Transporter objects are instantiated with the SMTP New transporter command. They provide the following properties and functions:

.acceptUnsecureConnection : Boolean True if 4D is allowed to establish an unencrypted connection
.authenticationMode : Text the authentication mode used to open the session on the mail server
.bodyCharset : Text the charset and encoding used for the body part of the email
.checkConnection() : Object checks the connection using information stored in the transporter object
.connectionTimeOut : Integer the maximum wait time (in seconds) allowed to establish a connection to the server
.headerCharset : Text the charset and encoding used for the email header
.host : Text the name or the IP address of the host server
.keepAlive : Boolean True if the SMTP connection must be kept alive until the transporter object is destroyed
.logFile : Text the path of the extended log file defined (if any) for the mail connection
.port : Integer the port number used for mail transactions
.send( mail : Object ) : Object sends the mail object to the SMTP server defined in the transporter object and returns a status object
.sendTimeOut : Integer the maximum wait time (in seconds) of a call to .send( ) before a timeout occurs
.user : Text the user name used for authentication on the mail server

SMTP New transporter

History

Release	Changes
18	New logFile property
17 R5	New bodyCharset and headerCharset properties
17 R4	Added

SMTP New transporter( server : Object ) : 4D.SMTPTransporter

Parameter	Type		Description
server	Object	->	Mail server information
Result	4D.SMTPTransporter	<-	SMTP transporter object

Description

The SMTP New transporter command configures a new SMTP connection according to the server parameter and returns a new SMTP transporter object. The returned transporter object will then usually be used to send emails.

This command does not open any connection to the SMTP server. The SMTP connection is actually opened when the .send() function is executed.

The SMTP connection is automatically closed:

• when the transporter object is destroyed if the keepAlive property is true (default),
• after each .send( ) function execution if the keepAlive property is set to false.

In the server parameter, pass an object containing the following properties:

server	Default value (if omitted)
.acceptUnsecureConnection : Boolean True if 4D is allowed to establish an unencrypted connection	False
.accessTokenOAuth2: Text .accessTokenOAuth2: Object Text string or token object representing OAuth2 authorization credentials. Used only with OAUTH2 authenticationMode. If accessTokenOAuth2 is used but authenticationMode is omitted, the OAuth 2 protocol is used (if allowed by the server). Not returned in SMTP transporter object.	none
.authenticationMode : Text the authentication mode used to open the session on the mail server	the most secure authentication mode supported by the server is used
.bodyCharset : Text the charset and encoding used for the body part of the email	mail mode UTF8 (US-ASCII_UTF8_QP)
.connectionTimeOut : Integer the maximum wait time (in seconds) allowed to establish a connection to the server	30
.headerCharset : Text the charset and encoding used for the email header	mail mode UTF8 (US-ASCII_UTF8_QP)
.host : Text the name or the IP address of the host server	mandatory
.keepAlive : Boolean True if the SMTP connection must be kept alive until the transporter object is destroyed	True
.logFile : Text the path of the extended log file defined (if any) for the mail connection	none
password : Text User password for authentication on the server. Not returned in SMTP transporter object.	none
.port : Integer the port number used for mail transactions	587
.sendTimeOut : Integer the maximum wait time (in seconds) of a call to .send( ) before a timeout occurs	100
.user : Text the user name used for authentication on the mail server	none

Result

The function returns a SMTP transporter object. All returned properties are read-only.

Example

 $server:=New object
 $server.host:="smtp.gmail.com" //Mandatory
 $server.port:=465
 $server.user:="4D@gmail.com"
 $server.password:="XXXX"
 $server.logFile:="LogTest.txt" //Extended log to save in the Logs folder

 var $transporter : 4D.SMTPTransporter
 $transporter:=SMTP New transporter($server)

 $email:=New object
 $email.subject:="my first mail "
 $email.from:="4d@gmail.com"
 $email.to:="4d@4d.com;test@4d.com"
 $email.textBody:="Hello World"
 $email.htmlBody:="<h1>Hello World</h1><h4>'Neque porro quisquam est qui dolorem ipsum quia dolor sit amet, consectetur, adipisci velit...'</h4>\
 <p>There are many variations of passages of Lorem Ipsum available."\
 +"The generated Lorem Ipsum is therefore always free from repetition, injected humour, or non-characteristic words etc.</p>"

 $status:=$transporter.send($email)
 If(Not($status.success))
    ALERT("An error occurred sending the mail: "+$status.message)
 End if

4D.SMTPTransporter.new()

4D.SMTPTransporter.new( server : Object ) : 4D.SMTPTransporter

Parameter	Type		Description
server	Object	->	Mail server information
Result	4D.SMTPTransporter	<-	SMTP transporter object

Description

The 4D.SMTPTransporter.new() function creates and returns a new object of the 4D.SMTPTransporter type. It is identical to the SMTP New transporter command (shortcut).

.acceptUnsecureConnection

History

Release	Changes
17 R4	Added

.acceptUnsecureConnection : Boolean

Description

The .acceptUnsecureConnection property contains True if 4D is allowed to establish an unencrypted connection when encrypted connection is not possible.

It contains False if unencrypted connections are unallowed, in which case an error in returned when encrypted connection is not possible.

Available secured ports are:

• SMTP

  • 465: SMTPS
  • 587 or 25: SMTP with STARTTLS upgrade if supported by the server.

• IMAP

  • 143: IMAP non-encrypted port
  • 993: IMAP with STARTTLS upgrade if supported by the server

• POP3

  • 110: POP3 non-encrypted port
  • 995: POP3 with STARTTLS upgrade if supported by the server.

.authenticationMode

History

Release	Changes
17 R4	Added

.authenticationMode : Text

Description

The .authenticationMode property contains the authentication mode used to open the session on the mail server.

By default, the most secured mode supported by the server is used.

Possible values are:

Value	Constants	Comment
CRAM-MD5	SMTP authentication CRAM MD5	Authentication using CRAM-MD5 protocol
LOGIN	SMTP authentication login	Authentication using LOGIN protocol
OAUTH2	SMTP authentication OAUTH2	Authentication using OAuth2 protocol
PLAIN	SMTP authentication plain	Authentication using PLAIN protocol

.bodyCharset

History

Release	Changes
18	Support for UTF8 base64
17 R5	Added

.bodyCharset : Text

Description

The .bodyCharset property contains the charset and encoding used for the body part of the email.

Possible values:

Constant	Value	Comment
mail mode ISO2022JP	US-ASCII_ISO-2022-JP_UTF8_QP	headerCharset: US-ASCII if possible, Japanese (ISO-2022-JP) & Quoted-printable if possible, otherwise UTF-8 & Quoted-printable bodyCharset: US-ASCII if possible, Japanese (ISO-2022-JP) & 7-bit if possible, otherwise UTF-8 & Quoted-printable
mail mode ISO88591	ISO-8859-1	headerCharset: ISO-8859-1 & Quoted-printable bodyCharset: ISO-8859-1 & 8-bit
mail mode UTF8	US-ASCII_UTF8_QP	headerCharset & bodyCharset: US-ASCII if possible, otherwise UTF-8 & Quoted-printable (default value)
mail mode UTF8 in base64	US-ASCII_UTF8_B64	headerCharset & bodyCharset: US-ASCII if possible, otherwise UTF-8 & base64

.checkConnection()

History

Release	Changes
17 R4	Added

.checkConnection() : Object

Parameter	Type		Description
Result	Object	<-	Status of the transporter object connection

Description

The .checkConnection() function checks the connection using information stored in the transporter object, recreates the connection if necessary, and returns the status. This function allows you to verify that the values provided by the user are valid and consistent.

Returned object

The function sends a request to the mail server and returns an object describing the mail status. This object can contain the following properties:

Property		Type	Description
success		boolean	True if the check is successful, False otherwise
status		number	(SMTP only) Status code returned by the mail server (0 in case of an issue unrelated to the mail processing)
statusText		text	Status message returned by the mail server, or last error returned in the 4D error stack
errors		collection	4D error stack (not returned if a mail server response is received)
	[ ].errCode	number	4D error code
	[ ].message	text	Description of the 4D error
	[ ].componentSignature	text	Signature of the internal component which returned the error

For information about SMTP status codes, please refer to this page.

Example

 var $pw : Text
 var $options : Object
 var $transporter : 4D.SMTPTransporter
 $options:=New object

 $pw:=Request("Please enter your password:")
 $options.host:="smtp.gmail.com"

 $options.user:="test@gmail.com"
 $options.password:=$pw

 $transporter:=SMTP New transporter($options)

 $status:=$transporter.checkConnection()
 If($status.success=True)
    ALERT("SMTP connection check successful!")
 Else
    ALERT("Error # "+String($status.status)+", "+$status.statusText)
 End if

.connectionTimeOut

History

Release	Changes
17 R5	Added

.connectionTimeOut : Integer

Description

The .connectionTimeOut property contains the maximum wait time (in seconds) allowed to establish a connection to the server. By default, if the property has not been set in the server object (used to create the transporter object with SMTP New transporter, POP3 New transporter, or IMAP New transporter), the value is 30.

.headerCharset

History

Release	Changes
17 R5	Added

.headerCharset : Text

Description

The .headerCharset property contains the charset and encoding used for the email header. The header includes the following parts of the email:

• subject,
• attachment filename(s),
• email name.

Possible values:

Constant	Value	Comment
mail mode ISO2022JP	US-ASCII_ISO-2022-JP_UTF8_QP	headerCharset: US-ASCII if possible, Japanese (ISO-2022-JP) & Quoted-printable if possible, otherwise UTF-8 & Quoted-printable bodyCharset: US-ASCII if possible, Japanese (ISO-2022-JP) & 7-bit if possible, otherwise UTF-8 & Quoted-printable
mail mode ISO88591	ISO-8859-1	headerCharset: ISO-8859-1 & Quoted-printable bodyCharset: ISO-8859-1 & 8-bit
mail mode UTF8	US-ASCII_UTF8_QP	headerCharset & bodyCharset: US-ASCII if possible, otherwise UTF-8 & Quoted-printable (default value)
mail mode UTF8 in base64	US-ASCII_UTF8_B64	headerCharset & bodyCharset: US-ASCII if possible, otherwise UTF-8 & base64

.host

History

Release	Changes
17 R5	Added

.host : Text

Description

The .host property contains the name or the IP address of the host server. Used for mail transactions (SMTP, POP3, IMAP).

.keepAlive

History

Release	Changes
17 R4	Added

.keepAlive : Boolean

Description

The .keepAlive property contains True if the SMTP connection must be kept alive until the transporter object is destroyed, and False otherwise. By default, if the keepAlive property has not been set in the server object (used to create the transporter object with SMTP New transporter), it is True.

The SMTP connection is automatically closed:

• when the transporter object is destroyed if the .keepAlive property is true,
• after each .send( ) function execution if the .keepAlive property is set to false.

.logFile

History

Release	Changes
17 R5	Added

.logFile : Text

Description

The .logFile property contains the path of the extended log file defined (if any) for the mail connection. It can be relative (to the current Logs folder) or absolute.

Unlike regular log files (enabled via the SET DATABASE PARAMETER command), extended log files store MIME contents of all sent mails and do not have any size limit. For more information about extended log files, refer to:

• SMTP connections - 4DSMTPLog.txt
• POP3 connections - 4DPOP3Log.txt
• IMAP connections - 4DIMAPLog.txt

.port

History

Release	Changes
17 R4	Added

.port : Integer

Description

The .port property contains the port number used for mail transactions. By default, if the port property has not been set in the server object (used to create the transporter object with SMTP New transporter, POP3 New transporter, IMAP New transporter), the port used is:

• SMTP - 587
• POP3 - 995
• IMAP - 993

.send()

History

Release	Changes
17 R5	Support of mime contents
17 R4	Added

.send( mail : Object ) : Object

Parameter	Type		Description
mail	Object	->	Email to send
Result	Object	<-	SMTP status

Description

The .send() function sends the mail object to the SMTP server defined in the transporter object and returns a status object.

The transporter object must have already been created using the SMTP New transporter command.

The method creates the SMTP connection if it is not already alive. If the .keepAlive property of the transporter object is false, the SMTP connection is automatically closed after the execution of .send(), otherwise it stays alive until the transporter object is destroyed. For more information, please refer to the SMTP New transporter command description.

In mail, pass a valid Email object to send. The origination (where the email is coming from) and destination (one or more recipients) properties must be included, the remaining properties are optional.

Returned object

The function returns an object describing the SMTP status of the operation. This object can contain the following properties:

Property	Type	Description
success	boolean	True if the send is successful, False otherwise
status	number	Status code returned by the SMTP server (0 in case of an issue unrelated to the mail processing)
statusText	text	Status message returned by the SMTP server

In case of an issue unrelated to the SMTP processing (e.g. a mandatory property is missing in mail), 4D generates an error that you can intercept using a method installed by the ON ERR CALL command. Use the GET LAST ERROR STACK command for information about the error.

In this case, the resulting status object contains the following values:

Property	Value
success	False
status	0
statusText	"Failed to send email"

.sendTimeOut

History

Release	Changes
17 R4	Added

.sendTimeOut : Integer

Description

The .sendTimeOut property contains the maximum wait time (in seconds) of a call to .send( ) before a timeout occurs. By default, if the .sendTimeOut property has not been set in the server object, the value 100 is used.

.user

History

Release	Changes
17 R4	Added

.user : Text

Description

The .user property contains the user name used for authentication on the mail server.